CHAUFFE - EAU  SOLAIRE

FLOWAY  Co Ltd

Raccordement  direct au chauffe-eau électrique existant

 ou

avec réserve autonome de 100 à 600 litres

LE PANNEAU SOLAIRE COLLECTEUR

LE PLUS PERFORMANT DU MARCHÉ

Normes CE

PRODUIT DESCRIPTION

Heat Collector Type:          FP3.0-A

Measurement:          2000 x 1000 x 95 mm

Gross Area:          2.03 m2

Aperture Area:          1.84 m2

Absorption Area:          1.73 m2

Total Weight:          41.6 kg

Normes CE

CHAUFFE EAU AVEC CUVE SÉPARÉE

Solar collector with separated tank

CHAUFFE EAU SOLAIRE

Solar water heater

Product Description

Product specialty:

(1) High heat effectiveness: Higher than normal all-glass tube by 10%;

(2) Heat-pipe conduction, no water inside, thus it is successfully prevented form the defects of tube blockage and low power output caused by water fouling and deposits or dust and sand;

(3) With small thermal capability, it can output power in 2 minutes. The highest temperature of cooling end can reaches 250degree centigrade. The average heat efficiency can still be 50% even under -50 degree centigrade

(4) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube to get higher heat output in cloudy weather and in moist area, especially in winter.

(5) Solar collecting plate is installed and sealed inside the tube of high-quality borosilicate glass with 5x10-2Pa of vacuum, so it cannot be corroded even in moist area;

(6) Hot water system can endure 0. 6Pa so that it can be connected to tap

CHAUFFE EAU SOLAIRE

Solar water heater

Product Description

Dimension:1795*1688*1740mm

water capacity:168L

warm-keeping layer:70mm

suitable persons:4-5

CHAUFFE EAU SOLAIRE AVEC TUBE SHCMV PRESSURISÉ

Pressured solar water heater with SHCMV TUBE

Product Description

C1.9-9A:

water tank (special porcelain tank) capacity:92L,

super heat conduction vacuum tube length:1.9m, number:9 pcs, diameter:70mm

*C1.9-12A:

water tank (special porcelain tank)capacity:120L,

super heat conduction vacuum tube length:1.9m, number:12pcs, diameter:70mm

*C1.9-15A:

water tank (special porcelain tank) capacity:150L,

super heat conduction vacuum tube length:1.9m, number:15 pcs, diameter:70mm

*C1.9-20A:

water tank (special porcelain tank) capacity:200L,

super heat conduction vacuum tube length:1.9m, number:20 pcs, diameter:70mm

Special porcelain tank technical data:

No contacting point, no leakage, long lifeIt is manufactured by choosing special qualified porcelain enamel steel plate and integrated stretching one time molding process and no wire automatic plasma welding. Meanwhile being introduced recent technology from Germany, it melts special silicon compound after baking at 900 and inner flask steel wall and forms special Blue Giant inner flask. It features no corrosion forever, no leakage forever, no scale forever, no shrunken by pumping, no broken by pressing, etc. It is unique special inner flask in China .Particularly it is suitable for salina, seawater, deep well at different region. Its operation life will be over 15 years.

And this type solar water heater has won the Britain Gold Crown Award

CHAUFFE EAU SOLAIRE PRESSURISÉ

Heat Pipe Pressured Solar Water Heater

Product Description

Specifications

Tank capacity(L):110/140/170/200

Tube specification(Diameter x Length) (mm): Heat pipe 58 x 1800

Tube quantity:12/16/20/24

Tube vacuum degree:5 x 10-3

Tube absorption >0.88

Tube heat loss <0.08

Tube heat transfer power:26000Kw/m2

Working pressure(MPa); 0.6

Anti freeze(C): -40

Anti ice drops(Diameter mm):30

Tube start working temperature(C) <25

Lighting Area (Made by Alum alloy) (m2):2.27/2.83/3.40

Support frame anti wind (stainless steel):26.5m/S 10 grade

Tank inner specification (Diameter x Length) (mm):350 x 2234

Thickness of tank inner(mm):1.8

Material of tank outer: Steel coated with AL & Zn

Insulation (mm): Polyurethane 65mm

Color of caps on the side of the tank: Black

Heat element(fitted in the water tank):1100W/220V/50Hz

Thermostat:30 C --80 C (cut limiter)

Dimensions of inlet and outlet of water: G1/2

PANNEAU SOLAIRE COLLECTEUR AVEC CORPS DE CHAUFFE TRADITIONNEL

Solar Collector(normal heat pipe) with Aluminum alloy manifold

Product Description

This model is with the normal heater pipe(58*1800mm), and there are 12 tubes, 18 tubes and 24 tubes of this model.

The manifold is with aluminum alloy

PANNEAU SOLAIRE COLLECTEUR AVEC TUBE SHCMV

Solar collector with SHCMV tube

Product Description

Product Description:

Solar collector separated from water tank appearance is exquisite. Because solar collector and water tank are separated, it exchange the phenomenon of big and ponderous of solar water heater. Its volume is smaller and its appearance is more beautiful. Moreover the solar collector can be adhered to roof and also handled on balcony and stuck on wall. The water storage tank can be hidden to toilet. It can realize perfect combination with architecture and eliminate sight pollution of solar water heater. Its performance is better. Heat collector and water storage tank of the product are separated. Being adapted analogy heating technology and computer automatic control, its structure is simple and its operation is convenient and it is durable. It promote that solar water heater goes forward to intellectualized science and technology.

Advantages

Effective and applicable:

It adopts the efficient al-n/al heat absorption coating vacuum pipe heat collector. It has high absorption, low emission rate.

Scientific and reasonable

Water inlet and outlet are located in the lower parts of the water tank with easy installation. It reduces the calorific loss. There is no dead angle area inside the water tank.

Superior material

Super heat conduction metal vacuum tube(shcmv tube). The outer casing of the tank adopts the excellent quality stainless steel with strong corrosion-resistance. The inner body employs the imported sus304 stainless steel welding for shaping. It has features such as strong erosion-proof, long life. On-pollution to the water, clean and hygiene.

Ultra-strong insulation

Imported urethane high-density integral foaming,55mm super thickness insulation layer, extreme heat loss inside the water tank.

Non-pollution, effectively protect the environment, energy saving, extremely low use cost at ordinary times. Once invested, you will benefit from it forever. You may withdraw the cost within 2 or 3 years the product use life is as long as above 15 years.

The SHCMV tube is used in solar collector,when solar energy gets to heat pipe,medium in tube vaporized at 25 degree,then conducts heat energy received to cooling end.After the process,a circulation is completed.

CHAUFFE EAU SOLAIRE

solar water heater

Product Description

A6 series :

Diameter of water tank: 480mm

Outer tank: Al&Zn coated steel

Inner tank: porcelain enamel

Support stand: color coated steel

Vacuum tube: 1.8m- 58mm

Insulation: polyurethane integral foam

A8 series:

Diameter of water tank: 510mm

Outer tank: Al&Zn coated steel

Inner tank: porcelain enamel

Support stand: color coated steel

Vacuum tube: 2.0m- 58mm

Insulation: polyurethane integral foam